PRODUCT FAMILY

Have a question

In Line Breakaway Metal Shell

  • Nano Circular Connectors
  • Circular Metal Shell - Inline Break Away
    • Wired Connector
    • Metal Shell Connector w/Wire Leads
    • Operating Temperature -50 ℃ to 200 ℃
    • 7,12 and 19 Contacts
    • IP67 Option
  • Ulti-Mate is in the process of qualification testing for MIL-DTL-32139 product.
NanoD Circular Inline Metal Break Away Wired
Electrical
Contact Residence 0.033 mΩ max.@ 1.0 A
CURRENT RATING 1.0 Amp Max.
DIELECTRIC WITHSTANDING VOLTAGE 250 VAC at sea level, 100 VAC at 70,000 ft.
INSULATION RESISTANCE 5,000 Mega Ω min.
Mechanical
CONTACT ENGAGING FORCE: 5 oz max.(Contact average is 2 oz.)
CONTACT SEPARATING FORCE: 0.4 oz.min.
CONNECTOR MATING FORCE 7 oz. x number of contacts max.
CONNECTOR UNMATING FORCE 7 oz. x number of contacts max.
VIBRATION No Damage or interruption detected (one microsecond sensitivity) EIA-364-28 Condition IV
SHOCK No Damage or interruption detected (one microsecond sensitivity) EIA-364-28 Condition IV
DURABILITY No mechanical or electrical defects after 200 matings
SALT SPRAY No exposure of base metal or loss of performance after 96 hours for both Nickel and Cadmium plating

Consult factory to determine if optional hardware is available.

Materials and Finishes
Pin Contacts BeCu Alloy Strip per ASTM-B-194
Socket Contacts Brass Alloy C260 per ASTM B135
Contact Plating Gold Plate per ASTM B488 , or SAE AMS 2422
Metal Shells Aluminum alloy per SAE-AMS-QQ-A-200/8, type 6061-T6 with Electroless Nickel Plating per SAE-AMS2404,Class 3 OR 4

Aluminum alloy per SAE-AMS-QQ-A-200/8, type 6061-T6 with Cadmium Plating SAE-AMS-QQ-P-416,Type II ,Class 1

Aluminum alloy per SAE-AMS-QQ-A-200/8, type 6061-T6 with Black Anodize Plating per MIL-A-8625,Type III,Class 2

Stainless Steel per ASTM A582
Molded Insulators Into Metal Housing LCP(Liquid Crystal Polymer) GLCP-30F or PPS per MIL-M-24519 GST-40F
Hardware Corrosion Resistant Steel per ASTM A 582/A582 or ASTM A 581/A581M, Passivated per SAE AMS-2700
Back

Please confirm the part number(s) you selected with our customer service department prior to placement of order.

x